Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
This Part Fits:
| Year | Make | Model | Submodel |
|---|
| 1974-1983 | Jeep | Cherokee | Base |
| 1981-1982 | Jeep | Cherokee | Chief |
| 1983 | Jeep | Cherokee | Pioneer |
| 1974-1977 | Jeep | Cherokee | S |
| 1978-1980 | Jeep | Cherokee | Wide Track |
| 1983 | Jeep | Cherokee | Wide Track Chief |
| 1984-1991 | Jeep | Grand Wagoneer | Base |
| 1984-1985 | Jeep | Grand Wagoneer | Limited |
| 1975-1988 | Jeep | J10 | Base |
| 1975-1988 | Jeep | J20 | Base |
| 1975-1982 | Jeep | Wagoneer | Base |
| 1982-1983 | Jeep | Wagoneer | Brougham |
| 1975-1976 | Jeep | Wagoneer | Custom |
| 1979-1983 | Jeep | Wagoneer | Limited |
